You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).
How long should you cook fudge?
Boil until the mixture reaches 234°F on a candy thermometer. Stir gently throughout the entire boiling time. Note: If you do not have a candy thermometer, allow the mixture to boil for 7 or 8 minutes but do not exceed 9 minutes.
How do you know when Fudge is ready?
You know it’s ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.
How long do you leave fudge in the fridge to set?
How long does it take for fudge to set? Once the fudge has been cooked, has thickened and any extra ingredients added, it will normally set in about 3 hours. You can also make it in the evening and allow it to set overnight.
What temperature is soft ball stage for fudge?
Soft-ball stage refers to a specific temperature range when cooking sugar syrups, occurring between 235 and 245 F. In addition to using a candy thermometer, this stage can be determined by dropping a spoonful of hot syrup into a bowl of very cold water.
Can I bake fudge that didn’t set?
If it’s overcooked (resulting in grainy fudge) or undercooked (resulting in poor setting) all you really need to do is add a bit of cream, reheat the fudge to the target temperature, and let it set again.
What happens if you cook fudge too long?
Candy that isn’t cooked long enough will end up too soft; overcooking makes fudge crumbly or hard. High-quality fudge has many small crystals. If the process of crystallization begins too early, fewer crystals form and they become much larger.
Should you Stir fudge while cooking?
Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. … The fudge is ready when a candy thermometer reads between 112 to 114 °C (234 to 237 °F) or the mixture forms a soft ball in cold water. Let the mixture cool before beating.
How long does it take for Fudge to reach soft ball stage?
Soft ball stage is 112-115c (234-240c). You can also test for soft ball stage by using a glass of cold water. When the fudge has boiled for about 10 minutes start to test by dropping a little of the mixture into a glass of cold water.
How do I get my fudge to harden?
To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps.
Should you refrigerate fudge?
Fudge will keep at room temperature just fine. It does not need to be refrigerated. You can keep it in the refrigerator if you feel that you like it cold–and some people prefer it that way. In this case, just make sure it is air tight, as cold air will surely dry out your fudge quicker.
Does fudge made with condensed milk need to be refrigerated?
Fudge does not need to be kept refrigerated.
What can I do with fudge that didn’t set?
Bring the fudge back to boiling temperature (212 F). Cook at the temperature specified at the recipe again and then take it off the heat. Repeat the steps of cooling the fudge and then beating it until it has lost its sheen. Once the material is no longer shiny, you can pour it into a pan and see if it sets up.
What is the hardest candy stage?
|firm ball (e.g., soft caramel candy)||118 to 120 °C (244 to 248 °F)||87%|
|hard ball (e.g., nougat)||121 to 130 °C (250 to 266 °F)||90%|
|soft crack (e.g., salt water taffy)||132 to 143 °C (270 to 289 °F)||95%|
|hard crack (e.g., toffee)||146 to 154 °C (295 to 309 °F)||99%|
How can you tell soft ball stage without a thermometer?
To check your sugar syrup has reached the correct stage without using a sugar thermometer, place a bowl of very cold water next to the hob. Using a clean spoon, carefully take a little of the syrup and drop it into the bowl of cold water. Leave to cool for a moment then pick up the ball of syrup.
How can I tell if I have a hard crack stage without a thermometer?
If you don’t have a candy thermometer, you can use the cold water test in a pinch: Drop a spoonful of hot syrup into cold water, then remove the candy from the water and attempt to bend it. If your syrup has reached the hard-crack stage, it will form brittle strands in the water and crack as you bend it.